To change a watch battery, first you need small tools – a small screwdriver, tweezers – and also be very careful when detaching the back, when replacing the old battery for a new one, when putting everything together again, so that you can use the watch again.

If your watch is no longer ticking, time to get the battery replaced. If you know how to replace a watch battery, it will save you some hours and cash to use your favorite piece of time without the pains of getting to the jeweler. In this post, we will take you through steps on how you can easily replace your watch battery from home.

Tools You’ll Need

Prepare yourself with these tools before attempting to change your watch’s battery.

• A small screwdriver (usually a Phillips or flat-head, depending on your watch)
• A case knife or watch case opener
• A pair of tweezers
• A new battery (ensure you check the model required for your specific watch)
• A clean, flat workspace

Steps to Change a Watch Battery

This simple process allows you to maintain your timepiece at home and keep it ticking.

1. Prepare Your Workspace

Find a clean, clear area to work. Throw down a soft cloth because you don’t want to scratch your watch and catch parts that fall off during deconstruction.

2. Get the Watch Back Off

With your case knife or the little screwdriver, you have to take off the back of your watch. In cases of model difference, either the screw holds on to the back or the snap back, and with screw, a screw driver must be used. Take away the screws carefully, place them to the side and in taking out a snap back get hold of the groove then twist it softly to pop open.

3. Note Your Battery Position

Once you have taken out the back, pay attention to where the battery is. This way, when you put in the new battery, you will ensure you do it correctly. You could even take a picture as a reminder.

4. Take Out Old Battery

You use tweezers to gently pull out the old battery from its space. Avoid touching the inside components and do not stretch any wires.

5. Put in New Battery

Place the new battery in the location of the old one. Ensure it’s in the correct position, and the + side is in the right direction if the watch has the markings inside.

6. Replace Watch Back

Once you have installed that new battery, replace the watch case very carefully. If this is a snap-back case, press down until you hear a click. In screw-down cases, simply replace the screws and then tighten them lightly so you don’t strip them.

7. Try the Watch

Try this: before tightening everything together, check to see if the watch is actually ticking. If it is, you’ve done a good job of changing that battery!

Final Tips

1. Right Battery 

Prior to a visit to a store buying a replacement battery, establish the correct model needed to replace your watch.

2. Cautions 

When handling the watch and its minor parts. Be gentle when handling and working with it. Since the watch can break on you if you are not.

3. Maintenance 

If your watch’s batteries drain out more often, take the watch to a workshop so that the other, hidden faults in the device can be determined.

Conclusion

This is empowering, keeping you independent of professionals with your timepiece. All that is needed to replace the battery within your watch is proper tools and a little patience. You now have the means to get your watch ticking for even more years with your hard work. Enjoy your piece and the pride of repairing it yourself!